Solid Structure 4 Jaws Dual Power Rear Feeding Chuck for Laser Cutting Machine
1. Description
Laser cutting chucks which are produced in our company are especially designed for laser pipe cutting machine. And our feeding chucks are also designed for laser pipe cutting machine which are also suitable for our main chucks. The chuck is in a solid structure and it is dual-power automatic two-two-center structure. It can be used to clamp the circular, square, rectangular, elliptical and other central axis symmetrical parts.
Rotating air inlet can be realized through tail-mounted gyrator so that the rapid clamping and loosening action can be achieved. The working air source adopts the principle of continuous air supply. When fixing the chuck base, it only needs to connect connect the matched motor with the gear and compressed air source, the clamping and driving work-piece to rotate can be achieved.
Because the length of the parts processed by the cutting machine is longer, the back chuck and matched main chuck are commonly installed in pairs on the equipment.
2. Performance Parameters
| | W400S-56 |
| | 56mm |
| | 13.5KN |
| | 0.4-0.9MPa |
| | 5300r/min |
| | 20-400mm |
| | 300mm |
| | 5.6kg.m2 |
| | 190kg |
| | 270kg |
3. Dimensions
| Specifications | A | B | B1 | C | D | E | F | G | H | I | J | L | M | N | O | P | Q | R | S | T |
| W400S-56 | 525 | 300 | 578 | 589 | 180 | 135 | 475 | 223 | 0 | 100 | 130 | 20 | 45 | 4 | 30 | 30 | M12 | 8-M10 | 18 | 375 |
4. Advantages
| a. Full stroke design |
| b. Wide range of applications, diversification of processing profiles |
| c. High repetitive positioning accuracy |
| d. Low maintenance cost, long service life |
| e. Multiple configurations are available
e.1 Solid or hollow e.2 Comb-type or mortise-groove type claws |
5. Production Line
