Dual Power Pneumatic Laser Chuck With Rotating For Tube Cutting Machine
1. Descripition
Our laser chuck is mainly designed for laser tube cutting machine. Laser chuck is used for clamping and feeding tubes when cutting tube. This laser chuck is four-jaw dual power with self-centering in pairs structure, which can clamp the roundm square, rectangular, elliptical and other centrally parts. Becaus of the long length of the parts processed by the cutter, the main chuck used as the head position of laser cutting and feed chuck matched with it are usually installed in pairs on the machine.
It can realize quick clamping and loosening by rotating air intake from the side, disconnet the air source before working. It is controlled by switching single and double cylinders, which produces differentc clamping forces, which has more advantages of clamping thin-walled tubes and heavy-duty pipes.
Except laser chuck, we also can provide customized gearbox. It can be mounted in top or bottom of the chuck.
2. Performance Parameters
| | GW500B-220 |
| | 100mm |
| | 1.2KN |
| | 0.4-0.9MPa |
| | 500r/min |
| | 20-210mm |
| | 400mm |
| | 11.5Kg.m2 |
| | 271kg |
| | 450kg |
3. Dimensions
| Specifications | A | B | B1 | C | D | E | F | G | H | I | R | S |
| GW500B-220 | 600 | 400 | 730 | 765 | 238 | 195 | 530 | 216 | 220 | 180 | 4-M10 | 18 |
4. Advantages
| a. Full stroke design |
| b. Wide range of applications, diversification of processing profiles |
| c. High repetitive positioning accuracy |
| d. Low maintenance cost, long service life |
| e. Multiple configurations are available
e.1 Solid or hollow
e.2 Comb-type or mortise-groove type claws |
5. Production Line
